Santec's Laboratory Type Compression Molding Presses are widely used in following applications :
Engineering or Technical colleges to give training to the students . i.e. I.I.T. , NIT , Engineering Colleges etc.
Research & Development Laboratories i.e. Sri Ram Institute of Industrial Research , SPIC Science Foundation, Vikram Sarabhai Space Centre, Indira Gandhi Centre of Atomic Research
Big Rubber Industries for R &D applications i.e. MRF, JK Tyres etc.
Composites Molding applications, Plastic Processors etc.
Laminates and Plastic cards manufacturing
A specially designed heating system ensures a high uniformity of temperature of the plates. For this reason, the press is ideal for moulding rubber & plastic sheets or samples for laboratory tests.
Digital PID controllers - FUJI (Japan) / WEST Make provided for accurate temp. measurements.
Lab type compression molding presses can also be successfully used for moulding small series of rubber or plastic parts for mass production too. The structure is very rigid & can work in 3 shifts.
Covered from all three side except front side for loading & unloading of mould inside the press. Safety photo guard are placed on the front side for operator's safety.
4-pillar type construction hence better alignment.
PLC with colored touch type display unit for user friendly operation.
Automatic press control device for programming an automatic production cycle by inserting upto 5 degassing cycles & curing time for moulding. At the end of the programmed time, the press automatically opens and a beeper signals the end of the cycle.
Precision alignment and parallelism of the platens
Flexible controls for sophisticated compression profiling
Front side Table with Ball Transfer units
Light / Lamp for the operator
Electric Motor & Pump
Photo Safety Guard (Sick Germany)
Front Light for Operator's Convenience
PLC with coloured touch type Display screen
Pressure Setting through PLC with the help of Pressure Transmitter
Emergency Push Button
Two Hand Push Button Operation
PID type Temperature Controllers – Fuji / West make
Mould Bank records in PLC
LVDT (Potentiometer) controlled ram Movement
Mold/ Platen Shuttles / sliding out arrangement
Front side Tilting arrangement of the Top platen of the Press
Thyristor to control the Multi temperatures during the curing time .
Molded Part knockout arrangement
Variable Displacement Pump.
Mold plate ejectors
Heating platens fitted with water recirculation circuit for the moulding of thermoplastic materials .
Added safety enclosures
Exhausts, enclosures for gas emissions
Platen temperatures to 400 degree Celsius
Mold thermocouple connections and temperature monitoring